Personal note on git, Linux, etc. commands

Published: Sun 16 April 2023

Personal note of anything (git, Linux, etc.) I would like to find out easily.

git

General commands

  • git mv <current filename> <new filename (with dir to move)>: move or rename file that is already tracked by git
  • git rm --cached <file1> <dir/file2>: remove file1 and file2 from repository, especially required when .gitignore is updated to avoid tracking file1 and file2, which was earlier tracked and now on repository. This will NOT remove the file from the current local system. "Be aware to commit all your changes before, otherwise you will loose control on all the changed files" - Hoang Pham at SO

Working with branches

  • git branch: list branches. The current branch is marked with an asterisk.
  • git stash: save current changes to a stash. Mandatory when I want to switch to another branch without committing the current changes.
  • git stash list: list all stashes
  • git stash apply: apply the latest stash
  • git stash apply stash@{<stash_number>}: apply a specific stash. The stash number can be found from git stash list
  • git switch <branch_name>: switch to a branch
  • git fetch <origin>: fetch changes from remote repository, including all branches. After fetching, I can see the changes through git log command.
  • git merge <orgin/another_branch>: merge changes from another branch to the current branch
  • git diff <branch1> <branch2>: compare changes between two branches
  • git branch -d <branch>: delete local branch. -d is for delete. -D is for force delete, without checking if the changes are merged or not.
  • git push <origin> -d <branch>: delete remote branch

Fix local configuration after changing repo name

  • git remote -v to check current repo name
  • git remote set-url origin git@github.com:<username>/<new-repo-name>.git: update origin

Roll back to a specific commit after pushed to remote

  • git reset --hard <commit-hash>: reset to a specific commit. Get the commit hash from git log or GitHub commit history
  • git push -f origin main: force push to remote Caution: This will remove all commits after the specified commit hash.

Colflict with git push/pull

  • Here's a nice SO answer that describe the merge options.
  • I had some remote commits that I didn't pull before commiting from local. As usual, the push failed as I haven't fetched the changes. Simple git pull wasn't successful. Rather, git pull --rebase worked. It pulls and rebases local commits on top of remote commits.

Configuring local machine to access (pull, push, etc.) GitHub private and public repositories.

Local machine – generate SSH key

git config --global user.name <NAME>
git config --global user.email <EMAIL>

GitHub – add local machine's SSH key

 

Linux

  • mkdir dir_name{01..12}: create dir_name01, dir_name02 ... dir_name12 directories
  • du -sh [dir]: disk usage summary in human readable form, optinally for a specific directory
  • du -h [dir] | sort -h: disk usage in human readable form sorted, optinally for a specific directory
  • du -sh --inode [dir]: disk inode usage summary in human readable form, optinally for a specific directory
  • curl -L -o <filename.ext> "https://drive.usercontent.google.com/download?id=xxxx&export=download&confirm=yes": download file from Google Drive
  • wget "<anyone-sharable-link>&download=1" -O <filename.ext>: download file from OneDrive. The link is the anyone-shareable link with download=1 at the end.

Managing permissions

  • chmod u+x <file>: add execute permission for user
  • chmod [-R] g+rwx <file[dir]>: add read, write, execute permission for group
  • chmod [-R] o+rwx <file[dir]>: add read, write, execute permission for others
  • chmode [-R] a+rwx <file[dir]>: add read, write, execute permission for all
  • chmod [-R] g-rwx <file[dir]>: remove read, write, execute permission for group
  • chmod [-R] o-rwx <file[dir}>: remove read, write, execute permission for others

 

LaTeX

VSCode on Linux setup

  • VSCode extensions
  • "LaTeX Workshop" to compile LaTeX files with Ctrl+Alt+B or each save
  • "Grammarly" to check grammar
  • Linux packages
  • latexmk, otherwise the LaTeX Workshop did not compile the file in my case (was getting "Recipe terminated with fatal error: spawn latexmk ENOENT." error)
  • texlive-latex-base and texlive-latex-extra packages to install LaTeX compiler and additional packages

Natbib-style citation in IEEE template

I like the \citep and \citet commands to automatically mention author names. To use them in IEEE template, I need to add the following lines in the preamble:

\usepackage[backend=biber,style=ieee,natbib=true,maxcitenames=2,mincitenames=1]{biblatex}
\renewcommand{\bibfont}{\footnotesize} % 8 pt as in template
\addbibresource{<bibfile>.bib}

Further to enable \IEEEtriggeratref{<number>} to balance the reference list at last page, I need to add the following lines in the preamble according to this StackExchange answer:

\usepackage{ifthen}

\makeatletter
\newcounter{IEEE@bibentries}
\renewcommand\IEEEtriggeratref[1]{%
  \renewbibmacro{finentry}{%
    \stepcounter{IEEE@bibentries}%
    \ifthenelse{\equal{\value{IEEE@bibentries}}{#1}}
    {\finentry\@IEEEtriggercmd}
    {\finentry}%
  }%
}
\makeatother

LaTeX Error: Unicode character ́ (U+0301)

  • Using XeLaTex would solve but sometimes we need to stick to pdfLaTeX

  • The main problem to locate the character since it usually exist in the bib file. An excellent hack, as suggested in this StackExchange answer, is to print something strange in place of the character:

    Put \DeclareUnicodeCharacter{0301}{*************************************} in the preamble (before \begin{document}) and find the asterisks on the pdf.

    After locating it, the final fix in my case was replacing \'\i by \'{i}

JFST Editorial Manager was not using bibtex/biber to compile *.bib file

The solution is to link the .bbl file, which is actually a compiled version of the .bib file

  • BibTeX user: Access the *.bbl file and change the main *.tex file: Comment out \bibliography{bib-file} and place <contents from the .bbl file>

  • BibLaTeX user: For biber backend, the biblatex-readbbl package worked fine in Overleaf and local machine but not in the Editorial Manager. Just include something.bbl and change the main tex file: Comment out \addbibresource{ref.bib} and place \usepackage[bblfile=something]{biblatex-readbbl}

 

Python

No module named pip

Install pip via apt:

sudo apt install python3-pip

Change default python version.

Create alias. Inside ~/.bashrc or if it is linked to ~/.bash_aliases:

alias python3='/usr/bin/python3.11'
  • ImportError: cannot import name '_imaging' from 'PIL'

Upgrade Pillow:

python -m pip install -U Pillow

Package installation failed due to setuptools (although setuptools>40 was installed): 'ERROR: No matching distribution found for setuptools>=40.8.0'. Randomly tried the following command and it worked:

python -m pip install -U wheel

Pyenv

pyenv install --list # list all available versions
pyenv install <version> # install a specific version
pyenv versions # list all installed versions
pyenv which python # show the path of the current python
pyenv global <version> # set a global version
pyenv virtualenv [<version>] <env_name> # create a virtual environment
pyenv activate <env_name> # activate the virtual environment

Python venv that comes with Python

Inside your preferred directory (it's standard to name it as .venv directory):

python -m venv <env_name>

Pro tip: Make include-system-site-packages = true in <env_name>/pyvenv.cfg file to include system-wide packages available in the virtual envirorment as well

Activate virtual environment. (better: put this command in ~/.bashrc if it's your default environment. Then you don't need to activate it everytime.)

source <target/directory/with/env_name>/bin/activate

Or, if you don't need the environment everytime. You can activate in each terminal session using the same command above.

To deactivate the current environment:

deactivate

Configuring cache directory

  • pip: Add export XDG_CACHE_HOME=/<target-dir> in ~/.bashrc
  • conda: Add conda config --add pkgs_dirs /<target-dir> in ~/.bashrc
  • Alternatively, conda config will create a .condarc file in home directory. Open it, and add the following lines:
envs_dirs:
  - /scratch2/<ident>/.conda/envs
pkgs_dirs:
  - /scratch2/<ident>/.conda/pkgs
  • Alternatively (better), create symbolic links to the target directory:
mkdir -p .cache && ln -s /<target-dir>/.cache $HOME/.cache
mkdir -p .local && ln -s /<target-dir>/.local $HOME/.local
mkdir -p .conda && ln -s /<target-dir>/.conda $HOME/.conda

Install older version of Python (e.g., python3.9) in Ubuntu 22.04.3 LTS

sudo add-apt-repository ppa:deadsnakes/ppa
sudo apt install python3.9 python3.9-venv python3.9-distutils

Normally, python command will point to the latest version. To point it to specific version, you can include the version (e.g., python3.9) in the command.

 

VS Code

Not finding virtual environment

  • As discussed in this answer, I need to go 'Select Interpreter' and can select the virtual environment through the file explorer.
  • Alternatively, as mentioned here: 'Open the Command Palette (Ctrl+Shift+P) and enter Preferences: Open User Settings. Then set python.defaultInterpreterPathInterpreter to the path of the virtual environment.'

Connecting remote host through SSH

  • As discussed here in VSCode, I need to specify the public key in the remote host from my local PC.

  • If the local machine is a macOS or Linux, terminal:

export USER_AT_HOST="your-user-name-on-host@hostname"
export PUBKEYPATH="$HOME/.ssh/id_ed25519.pub"

ssh-copy-id -i "$PUBKEYPATH" "$USER_AT_HOST"
  • If the local machine is Windows, PowerShell:
$USER_AT_HOST="your-user-name-on-host@hostname"
$PUBKEYPATH="$HOME\.ssh\id_ed25519.pub"

$pubKey=(Get-Content "$PUBKEYPATH" | Out-String); ssh "$USER_AT_HOST" "mkdir -p ~/.ssh && chmod 700 ~/.ssh && echo '${pubKey}' >> ~/.ssh/authorized_keys && chmod 600 ~/.ssh/authorized_keys"
  • Then I can connect to the remote host through SSH passphrase instead of the remote login password. Passphrase is associated with every SSH key when we generate the key.
  • Pretty convenient (it won't ask for a passphrase) if the passphrase is empty. To change SSH passphrase for a key, in PowerShell:
ssh-keygen -p

 

WSL

Ubuntu in WSL2 not starting up, both the Ubuntu terminal and VS Code

  • Restart the Ubuntu. In PowerShell: bash wsl --shutdown

 

SLURM commands

sbatch <script.sh> # to submit a job
salloc --nodes=<n> --cpus-per-task=<n> --mem=<n>GB --gres=gpu:<n> --time=<hh:mm:ss> --account=<id> # get some allocation for interactive session
ssh <node> # to connect to the allocated node
sacct # to see the job history of the user for today
sacct --starttime MMDD # MMDD is the month and day from which you want to see the job history
seff <jobid> # to see the efficiency of resource utilisation for the job
squeue -o "%A %N" -u user_name # to see the job id and node name of the user
scontrol show job <jobid> # to see the details of the job, including the node name
scontrol show job <jobid> -d # to see the detailed information of the job, including the **allocated GPU index**
sacct --format=JobID,JobName,Partition,Account,AllocCPUS,NodeList,State,ExitCode # sacct result, including the node list and other details provided in the format

 

Rclone commands

rclone copy <source> <destination> # copy files from source to destination. It **will not delete** the files in destination that are not in source. It will not copy the files that are already in destination.
rclone sync <source> <destination> # sync files from source to destination. It **will delete** the files in destination that are not in source.
rclone ls <remote>:<path> # list files in the remote path. Just mention <remote>: if you want to list all files in the remote.
rclone lsd <remote>:<path> # list directories in the remote path

Important flags

--dry-run # simulate the command without actually doing it
--progress # show progress of the command

 

Others

Change JupyerLab startup directory

As discussed in this SO thread:

  • jupyter server --generate-config will generate jupyter_server_config.py in ~/.jupyter/ directory
  • Uncomment/write c.ServerApp.root_dir = </your/preferred/directory/>

Ububtu WSL2 opens as root

  • As discussed here in Reddit, I need to change the default user to my username. In PowerShell:
ubuntu config --default-user <username>
  • The correct username can be found in /etc/passwd

Zoom Recording

  • While sharing the screen, 'optimize for video clip' option creates black boxes at different parts of shared screen (maybe the idea is to create black box on Zoom software-related pop-ups, but maybe buggy as of Nov 23.). So, I should share the screen without this option.
  • If I minimise my video, it will not be recorded.

Convert pdf to image in Linux

  • As mentioned here in askubuntu: pdftoppm input.pdf outputname [-png / -jpeg / etc.] -r <resolution>

find me on